<%rs_Product.close
set rs_Product=nothing%>
Product Show
<%rs_Product.close
set rs_Product=nothing%>
| HEPA filter leak detection >> Automatic filter detection device >> TDA-100P 自动式过滤器检测装置 |  |
 |
| |  | Product Id： | 2914193916 | Product Name： | TDA-100P 自动式过滤器检测装置 | Spec： | TDA-100P | Product Memo： | made in USA | Product Class： | HEPA filter leak detection | | |
|
 Product Content |
Product Model:: TDA-100P
Product Name: automatic filter detection device
- This is a test using the most advanced technology by the microcomputer control processor and automatic filter detection device, in order to debug a user-friendly operation, provides a friendly interface - all functions and movements of the test parameters are available through 4 set of function keys. Collection efficiency. Filter pressure loss and filter performance test flow test parameters, etc. can be directly displayed in the respective figures show panel. Through micro-computer processor to monitor these three parameters, the parameter exceeds a set point, PAIL bright lights, the parameters for the digital display flashes and alarm reset before the no testing - the device can be easily installed in the user - prepared to operate in Taichung, and through the RS-232C and computer connected to the data taken and control. .
Product Content
Specifications each detail and each part.
Particles occurred in principle and substance occurred
Sprayers: DOP, PAO
Size
0.18 Ucmd: the basis and foundation of Japan’s national 42CFRPart84 standards
Geometric standard deviation
<1.6: According to 42CFRPart84 and a basis for Japan’s national standard for the certification of
Mass concentration
20 ~ 150mg/m3
● planktonic particles test
Test particle
Scattered near the front
Test range
0.0001-200mg/m3
Testing accuracy
± 1%
Flow
10-100L/min
● Stress Test
Test particle
Electronic pressure converter
Test range
0-100H2O
Testing accuracy
Full range of ± 0.5%
● efficiency test
Test flow
10-100L/min
Test range
0-99.9995%
● Sampling Flow Testing
Test the principle of mass flowmeter
Test range
10-100L/min
Repeatability
± 0.5%
● Other
Power Supply
115V AC, 60Hz, 2A
Output
RS-232C
The need for compressed air source
339.6L/min or 5.6Kg/m3
Dimensions
About 534 × 813 × 788mm
** Use 20psi (0.14Mpa) pressure Note: do not recommend that DOP |
|
|
| Hits：352 AddTime：2009-2-9 【Print】 【Close】 | |
